The steps for laying acustom v-belt making machineare as follows:

1. Surface preparation: Ensure that the construction surface is dry and clean, and there are no sharp objects or other uneven parts. If necessary, do surface repair and cleaning first.

2. Measurement and cutting: as needed, use the appropriate tools to measure the size of the custom v-belt making machine, and then use the appropriate way to cut the sheet, ensuring that it matches the area to be covered.

3. Paste glue: Apply the appropriate glue or adhesive evenly on the construction surface, ensuring that the application range matches the size of the laid custom v-belt making machine. Take care to choose the appropriate glue

To ensure good adhesion.

4. Lay the rubber sheet: Place the cut custom v-belt making machine on the surface coated with glue, gradually roll it away and eliminate the air bubble. Make sure the rubber sheet is in full contact with the adhesive.

5. Flattening and trimming: Use a suitable tool (such as a rubber mallet) to gently beat the rubber sheet to make it flat and ensure that it is fully bonded to the surface. In addition, check and trim the joints between the plates

Seams to ensure seamless and flat connections.

6. Cleaning and completion: Clean up the excess adhesive and carry out the necessary follow-up treatment or care in accordance with the relevant requirements to ensure the stability and durability of the custom v-belt making machine.

Note that the installation procedure may vary according to different construction requirements and specifications. You are advised to refer to the installation guide or professional advice. Meanwhile,

In order to ensure that the construction process and results meet expectations, it is also very important to use high quality insulating rubber materials and appropriate tools and equipment.

custom v-belt making machine https://www.sincererubbertech.com/Automatic-fabric-wrapping-machine